NOCKTURNAL Nock Install Tool-Easy tool for installing and switching off light notches

The NOCKTURNAL Nock Install Tool is a handy little tool for removing the notches from your tubes, installing a Nockturnal light notch and easily switching them off after firing.

1. Remove the original notch from your arrow

• Insert the notch into the Nockturnal tool cavity at 45° as shown in figure 1.
• Lower the arrow horizontally so that the notch lies flat in the cavity.
• Place your thumb over the notch in the tool as shown in figure 2.
• Twist and pull at the same time to extract the notch from your arrow.

2. Inserting the Nockturnal luminous notch into your arrow

• Insert the luminous notch into the Nockturnal tool cavity at 45° as shown in figure 1.
• Lower the notch horizontally so that it lies flat in the cavity.
• Place your thumb over the notch in the tool as shown in figure 2.
• Turn and push at the same time to insert the Nockturnal luminous notch into your arrow.

3. Switching off the Nockturnal luminous notch

• Holding the arrow in one hand and the Nock Tool in the other, turn the arrow until you see the small, oval-shaped access hole at the base of the luminous notch as shown in figure 1.
• Insert the small steel hook of the Nock Tool at 90° into the access hole just between the colored head and the metal battery.
• With a small rotary movement, push the colored head up the notch until the luminous notch goes out, as shown in figure 2.

Practical and space-saving, the Nockturnal Nock Tool attaches to your key ring and goes everywhere with you.