TIGHTSPOT High-quality 5-arrow quiver for compound bows

Significantly reduces the torque of your bow. Leave your quiver on your bow and keep your arrows within reach...

The purpose of a bow quiver is to make your arrows easily accessible. Removing your quiver from your bow goes against this idea.

TightSpot fits your bow perfectly and is exceptionally light, which means virtually no torque. And that means greater shooting accuracy!

Why do so many bowhunters take off their quivers when hunting? Because they shoot better without them! They're willing to forgo having their arrows in range for a second shot to ensure an accurate shot. The problem is the design of most quivers. The further a quiver is from the bow, the more torque it creates. Torque affects accuracy, unbalances the balance and makes tuning more difficult, especially with broadheads. TightSpot's patented dovetail design eliminates this problem! But bow proximity is only half the problem! The heavier the quiver, the more torque it exerts. TightSpot Quivers win on this point too! They're exceptionally light, thanks to vibration-absorbing woven carbon rods and a frame machined from aircraft-grade aluminum.

Shoot better!

With the TightSpot ™ quiver, you shoot better with your quiver on your bow than you ever did without your old quiver!

TightSpot is infinitely adjustable, which means it acts like a stabilizer, balancing your bow; it also lets you misalign the quiver so your notches don't touch the ground.

The "RightSpot" 3-way adjustment system, exclusive to the TightSpot quiver (patent no. 8 839 773), lets you adjust the balance of your bow using your quiver. TightSpot acts as a stabilizer, improving your bow's balance.

1. Up or Down
This movement not only allows you to adjust the bow's balance, but also enables you to adjust the quiver high enough so that your arrow's notches don't penetrate the earth.

2. Forwards or backwards
Rotating the TightSpot forwards or backwards allows you to fine-tune the bow's balance, much like a stabilizer.

3. In or Out
By sliding your TightSpot quiver close to your bow on the patented dovetail rail, you'll virtually eliminate torque.

Hold your arrows firmly!

Never lose your arrows again...

TightSpot holds your arrows with 20 times more strength than other quivers. Never lose an expensive arrow on your way to your treestand again!
Individually adjustable arrow clamps will prevent loose arrows in the quiver or lost arrows altogether!

Over time or in cold weather, the arrow clips on all quivers tend to loosen. The exclusive Bulldog Gripper ™ system (patent no. 8,839,773) on a TightSpot quiver is different in that you can adjust the pressure for each arrow. By simply moving the ArrowWedge ™ setting, you'll get a customized hold for each arrow. No more arrows making noise, vibrating or falling out of your quiver!

Quiet as death... !!!

Any vibration means noise, and noise can mean a sharp reaction from game that makes the string "jump". TightSpot eliminates vibration and noise!

The TightSpot Quiver's integrated vibration absorption system attacks vibrations from every possible angle. In fact, it works so well that your bow vibrates less with a TightSpot quiver attached than without!

1. Extra-long-wheelbase TightSpot quivers feature extra-long travel. This distance between the hood and the tube gripper reduces boom and quiver vibrations, which significantly reduces unwanted noise.
2. The bumper strip on the crossbar eliminates boom vibrations. The TightSpot quiver is designed so that your arrows can rest against the bumper strip on the side of the crossbar, attenuating even the smallest vibrations.
3. The QuadFit ™ rubberized mutidirectional spacer lets you slide the quiver against the cable spreader. Rotate the QuadFit 4-way spacer (which has a different setting on each side), so that the TightSpot quiver is as tight as possible against your bow. This gives you another point of contact, absorbs vibrations and gives you a reference point so you can place the quiver in the same place every time.
4. High-quality woven carbon rods offer an unrivalled strength-to-weight ratio and absorb vibrations. One of the reasons why the TightSpot quiver is so light is that its structure consists of two carbon rods. These carbon rods are made from high-carbon woven carbon fabric. They're expensive but offer an exceptional strength-to-weight ratio, excellent stability and maximum vibration absorption. In fact, these rods work so well that your bow itself vibrates less with an attached TightSpot quiver than without one.
5. Acoustic damping material inside the cap. In the space between the bottom of the cap and the insert is a damping material specially designed for acoustic soundproofing applications. This makes the quiver quieter than ever.

SECONDARY GRIPPER

Our optional secondary clamp works with any of our 5-arrow quivers. This secondary clamp allows you to secure your arrows in the quiver without anything touching the heads in the cap. This way, your fixed-blade points stay sharp and the mechanical points can't deploy prematurely. The oval holes allow the arrow to be self-centering in the clamp and allow the installation of all sizes of hunting tubes, including the most popular micro-diameter barrels.

XL MOUNTING BRACKET

The new XL mounting bracket is extra long and offers more adjustment possibilities than ever before. This will promote quiver clearance on a bow where the arrow rest would conflict with the quiver. The XL mounting bracket is ½ inch longer than our standard mounting bracket for better clearance.

REDESIGNED OFFSET MOUNTING PLATE

This new bracket is 40% lighter than the previous version and features an additional 15 degrees of rotation for better clearance on different bows.

TREESTAND MOUNT

The Treestand mount is very simple... It mounts on the back of your 5- or 7-arrow quiver and stays there! It's easily removed and screwed into your tree, then you reattach the quiver to it. It's a sturdy mount that lets you take a second arrow with one hand, without the inconvenience of a hanging quiver.