TIGHTSPOT RISE High-end carbon 5-arrow quiver for compound bows

Significantly reduces the torque of your bow. Leave your quiver on your bow and keep your arrows within reach...

The purpose of a bow quiver is to make your arrows easily accessible. Removing your quiver from your bow goes against this idea.

TightSpot fits your bow perfectly and is exceptionally light, which means virtually no torque. And that means greater shooting accuracy!

Why do so many bowhunters take off their quivers when hunting? Because they shoot better without them! They're prepared to forgo having their arrows in range for a second shot to ensure an accurate shot. The problem is the design of most quivers. The further a quiver is from the bow, the more torque it creates. Torque affects accuracy, unbalances the balance and makes tuning more difficult, especially with broadheads. TightSpot's patented dovetail design eliminates this problem! But proximity to the bow is only half the problem! The heavier the quiver, the more torque it exerts. TightSpot Quivers win on this point too! They're exceptionally light, thanks to vibration-absorbing woven carbon rods and a frame machined from aircraft-grade aluminium.

Shoot better!

With the TightSpot ™ quiver, you shoot better with your quiver on your bow than you ever did without your old quiver!

TightSpot is infinitely adjustable, which means it acts like a stabiliser, balancing your bow; it also allows you to misalign the quiver so your notches don't touch the ground.

The 3-way 'RightSpot' adjustment system, exclusive to the TightSpot quiver (patent no. 8,839,773), allows you to adjust the balance of your bow using your quiver. TightSpot acts as a stabiliser, improving the balance of your bow.

1. Up or Down
This movement not only allows you to adjust the balance of the bow, but also allows you to adjust the quiver high enough so that the notches of your arrow do not penetrate the ground.

2. Forwards or backwards
Rotating the TightSpot forwards or backwards allows you to fine-tune the bow's balance, a bit like a stabiliser.

3. In or Out
By sliding your TightSpot quiver close to your bow on the patented dovetail rail, you'll virtually eliminate torque.

Hold your arrows firmly!

Never lose your arrows again...

TightSpot holds your arrows with 20 times more strength than other quivers. Never lose an expensive arrow on the way to your treestand again!
Individually adjustable arrow clips will prevent arrows from becoming loose in the quiver or being lost altogether!

Over time or in cold weather, the arrow clips on all quivers tend to loosen. The exclusive Bulldog Gripper ™ system (Patent No. 8,839,773) on a TightSpot quiver is different in that you can adjust the pressure for each arrow. By simply moving the ArrowWedge ™ setting, you'll get a custom hold for each arrow. No more arrows making noise, vibrating or falling out of your quiver!

Silent as death... !!!

Any vibration is synonymous with noise, and noise can mean a sharp reaction from game that makes the string "jump". TightSpot eliminates vibration and noise!

The TightSpot Quiver's built-in vibration absorption system attacks vibrations from every possible angle. In fact, this system works so well that your bow vibrates less with a TightSpot quiver attached than without one!

1. The extra-long wheelbase TightSpot quivers have a very long travel. This distance between the bonnet and the tube gripper reduces boom and quiver vibrations, which significantly reduces unwanted noise.
2. The bumper strip on the crossbar eliminates boom vibrations. The TightSpot quiver is designed so that your arrows can rest against the bumper strip on the side of the crossbar, reducing even the smallest vibrations.
3. The QuadFit ™ rubberised multi-directional spacer allows you to slide the quiver against the cable spreader. Rotate the QuadFit 4-way spacer (which has a different setting on each side), so that the TightSpot quiver is as tight against your bow as possible. This gives you another point of contact, absorbs vibration and gives you a reference point so you can place the quiver in the same place every time.
4. The high-quality woven carbon rods offer an unrivalled strength-to-weight ratio and absorb vibrations. One of the reasons why the TightSpot quiver is so light is that its structure consists of two carbon rods. These carbon rods are made from woven carbon fabric with a high carbon content. They are expensive but offer an exceptional strength-to-weight ratio, excellent stability and maximum vibration absorption. In fact, these rods work so well that your bow itself vibrates less with a TightSpot quiver attached than without one.
5. Acoustic damping material inside the cap. In the space between the bottom of the cowl and the insert is a damping material specially designed for acoustic soundproofing applications. This makes the quiver quieter than ever.

SECONDARY GRIPPER

INCLUDED with the RISE

Our optional secondary gripper works with any of our 5-arrow quivers. This secondary gripper allows you to secure your arrows in the quiver without anything touching the heads in the cap. This way, your fixed-blade points stay sharp and the mechanical points can't deploy prematurely. The oval holes allow the arrow to self-centre in the clamp and allow the installation of all sizes of hunting tubes, including the most popular micro-diameter barrels.

XL MOUNTING BRACKET

The new XL mounting bracket is extra long and offers more adjustment options than before. This will promote quiver clearance on a bow where the arrow rest would conflict with the quiver. The XL mounting bracket is ½ inch longer than our standard mounting bracket for better clearance.

REDESIGNED REMOTE MOUNTING PLATE

This new mount is 40% lighter than the previous version and has an extra 15 degrees of rotation for better clearance on different bows.

TREESTAND MOUNT

The Treestand mount is very simple... It mounts on the back of your 5- or 7-arrow quiver and stays there! It's easy to remove and screw into your tree, then you attach the quiver to it. It's a solid mount that lets you take a second arrow with one hand without the inconvenience of a hanging quiver.