The KS21 solar panel from KEEPGUARD has built-in high-capacity 2000 mAh batteries.
It is of course compatible with KEEPGUARD camera traps, but also with other brands.
Constructed with a fire-resistant casing and excellent built-in lithium batteries, this solar panel also has a charge level indicator on the back.
Orient it to fully absorb the sun's energy and it will provide continuous power to your hunting cameras.
Simply attach the solar panel to the tree trunk above your camera on the wall of the hunting lodge touse sunlight as a power source and generate electricity to keep your camera charged all season long.
If the battery charge is insufficient due to continuous rainy days, you can also recharge it via USB.
The KS21 solar panel from KEEPGUARD has built-in high-capacity 2000 mAh batteries.
It is of course compatible with KEEPGUARD camera traps, but also with other brands.
Constructed with a fire-resistant casing and excellent built-in lithium batteries, this solar panel also has a charge level indicator on the back.
Orient it to fully absorb the sun's energy and it will provide continuous power to your hunting cameras.
Simply attach the solar panel to the tree trunk above your camera on the wall of the hunting lodge touse sunlight as a power source and generate electricity to keep your camera charged all season long.
If the battery charge is insufficient due to continuous rainy days, you can also recharge it via USB.
Garanties sécurité
(à modifier dans le module "Réassurance")
Politique de livraison
(à modifier dans le module "Réassurance")
Politique retours
(à modifier dans le module "Réassurance")
The solar panel has an internal lithium-ion battery that is continuously charged by the solar cells when exposed to sunlight. Once connected, the camera will draw power primarily from the solar panel's charged lithium battery for as long as possible and will only switch to its internal batteries when the solar panel's charge level is too low. As a result, the camera's batteries will last significantly longer.
The solar panel also includes a USB port allowing its internal battery to be "pre-charged" before being installed in the field. This is NOT necessary before use, but it will allow it to start supplying additional power to your camera immediately rather than waiting for the solar cells to build up an adequate charge. To use this feature, connect a compatible mini USB cable (not included) from the solar panel to your computer or a suitable power source. The charging LED indicator on the back of the solar panel lights up red during charging, then turns green when charging is complete.
Install your solar panel in the tree above the camera where the solar panel has unobstructed exposure to the sun for most of the day.
Specifications
| Power requirement | 5 V @ min 500mA |
| USB charging voltage | 4V ~ 6V |
| Discharge voltage | 7V ~ 8.4V |
| Max. Discharge current | 2A |
| Max. discharge current Protection against charging voltage | 6V |
| Recommended charging time | 12 hours for a full charge |
| Charging priority | If USB and solar charging sources are available, USB charging will have a higher priority than solar. |
| Operating temperature | -20 - 40°C (Storage temperature: -30 - 70°C) |
| operating humidity | 5% - 90% |
No customer reviews for the moment.
