NOCKTURNAL Nock Install Tool-Easy tool for installing and switching off light notches

The NOCKTURNAL Nock Install Tool is a handy little tool that allows you to remove the notches from your tubes, install a Nockturnal luminous notch and easily switch them off after firing.

1. Remove the original notch from your arrow

• Insert the notch into the cavity of the Nockturnal tool at 45° as shown in figure 1.
• Lower the arrow horizontally so that the notch is flat in the cavity.
• Place your thumb over the notch in the tool as shown in Figure 2.
• Twist and pull at the same time to extract the notch from your arrow.

2. Inserting the Nockturnal luminous notch into your arrow

• Insert the luminous notch into the cavity of the Nockturnal tool at 45° as shown in figure 1.
• Lower the notch horizontally so that it lies flat in the cavity.
• Place your thumb over the notch in the tool as shown in Figure 2.
• Twist and push at the same time to insert the Nockturnal luminous notch into your arrow.

3. Switching off the Nockturnal luminous notch

• Holding the arrow in one hand and the Nock Tool in the other, turn the arrow until you see the small oval-shaped access hole at the base of the lighted notch as shown in figure 1.
• Insert the small steel hook of the Nock Tool at 90° into the access hole just between the coloured head and the metal battery.
• Using a small twisting motion, push the coloured head up the notch until the luminous notch goes out, as shown in Figure 2.

The practical, space-saving Nockturnal Nock Tool attaches to your keyring and goes everywhere with you.